TracVision R5SL
3
Gyro Replacement Instructions
c.
Rotate the elevation motor shaft counterclockwise until
the motor shaft nut is flush with the spacer, as shown in
Figure 3
.
Figure 3 Retracted Elevation Motor Shaft
d.
Remove the two Phillips screws securing the elevation
motor to the elevation motor mounting plate. Then
remove the elevation motor from the mounting plate
and set it aside.
Figure 4 Elevation Motor/Main PCB Screws
e.
Using a #1 Phillips screwdriver, remove the four screws
from the main PCB cover (see
Figure 4
).
NOTE:
The main PCB is static-sensitive. Ensure that you take the
necessary grounding precautions before handling.
f.
Gently remove the main PCB cover, ensuring no cables
are damaged by the edges of the cover.
Elevation Motor
Shaft
Spacer
Nut
Elevation
Motor
Mounting Plate
Main PCB
Cover
Screw (x4)
