TracVision R5SL
1
Gyro Replacement Instructions
TracVision
®
R5SL Gyro Replacement
Instructions
The following instructions explain how to replace the gyro in a
TracVision R5SL.
Tools Required
TIP:
The Flash Update Wizard is now available to KVH-authorized
dealers through the KVH Partner Portal at
www.kvh.com/partners
.
• #1 Phillips screwdriver
• #2 Phillips screwdriver
• 11/32" open-end wrench
• PC with the latest version of the Flash Update Wizard
installed
Be sure to avoid causing sharp bends in cables when securing or
rerouting cables in the following procedures. Sharp bends or
kinks in cables can degrade antenna performance.
IMPORTANT!
CAUTION
For your own safety, be sure to disconnect power from all wired
components before performing this procedure.
54-0441 Rev. A
