Federal Communications Commission (FCC)
Regulatory Information for Vehicle Use
Declaration of Conformity –
Standards to which Conformity is declared:
FCC Part 15
This device complies with Part 15 of the FCC Rules.
Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Responsible Party’s Name: KVH Industries, Inc.
Address: 50 Enterprise Center, Middletown, RI 02842
Telephone: 1-401-847-3327
Trade Name: KVH
Type of Equipment: Satellite Receiver
Model Number: TracVision A5
Federal Communications Commission (FCC)
–This equipment complies
with Part 15 of the FCC rules.
Part 15 Compliance –
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part 15 of the FCC
rules. These limits are designed to provide reasonable protection against
harmful interference in a vehicle installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by removing and applying
power to the equipment, the user is encouraged to try to correct the
interference by one or more of the following measures:
•
Increase the separation between the equipment and the
receiver.
•
Connect the equipment on a circuit different from that to which the
receiver is connected.
•
Consult the dealer or an experienced auto electronics technician for help.
The user may find the following booklet, prepared by the Federal
Communications Commission, helpful: “How to Identify and Resolve Radio
and TV Interference Problems.” This booklet is available from the U.S.
Government Printing Office, Washington, DC.
To meet FCC requirements, only components certified to comply with
Class B limits may be attached to this device. Operation with noncertified
peripherals is likely to result in interference to radio and TV reception.
To meet FCC requirements, shielded cables are required to connect the
device to another Class B certified device.
54-0287
iv
TracVision Receiver User’s Guide
