3
Before you begin, follow the steps below to
ensure you have everything needed to complete
the installation.
a.
Unpack the box and carefully examine all of
the supplied parts to ensure nothing was
damaged in shipment. Save the packaging for
future use.
b.
Gather the tools and materials listed below.
You will need these items to complete the
installation.
• #2 Phillips screwdriver
• 7/16" open-end wrench
• Flush cutters
• #2 Phillips torque screwdriver set to
5 in.-lbs
• 7/16" torque wrench set to 15 in.-lbs
• 7/16" torque wrench set to 20 in.-lbs
• Satellite TV receivers and/or DVRs
• RG-6 or RG-11 RF coax cabling with
Snap-N-Seal
®
F-connectors (see
• Silicone sealant, self-vulcanizing tape, or
equivalent
Figure 1: RF Cable Type Requirements
NOTE:
The RF cables connecting the antenna to the SWM
expander should not exceed 100 ft (30 m) in length. Only
RF cables connecting the 8-way splitters, receivers, and
DVRs can be wired over 100 ft (30 m) (up to 200 ft (60
m)).
For Lengths
Use RF Cable Type
Up to 100 ft (30 m)
RG-6
Up to 200 ft (60 m)
RG-11
Inspect Parts and Get Tools
1
