Kverneland H Series Скачать руководство пользователя страница 20 | Manualshive

Страница: 20 / 52

Kverneland H Series Скачать руководство пользователя страница 20

20

2. Disassembly

20

•

Tools

:

Chisel, hammer, snap ring pliers,

Extractor, fork wrench n°17, adjustable wrench

.

• Disassemble oil seals (4),(30)

• Disassemble snap ring (3), shim (6).

• Hit the shaft (29) from side (C)

• Pick up outer ring (5),disassemble inner ring
(5) from shaft (29), take away shim (2)

• Pick up from inside housing : Gear (7)

• Shim (1), spacer(16), gear(18),spacer(20)

• Gear (31),spacer (65) inner ring (5)

• Unscrew bolts (10), disassemble cover (9)

• Hit the shaft (19) from side (D) hole,

To reach the snap ring (24) from side (E)

• Take away inner ring (62).

• Disassemble snap ring (24) and shim (23)

• Uncaulk locknut (11), unscrew locknut (11).

•

Tools

:

Extractor, snap ring pliers, chisel, hammer.

• Disassemble shaft (19), inner ring (12)
snap ring (8) and take away shim (13)

• Disassemble snap rings(52) spacers
(63), pistons 53) and spring(50)

• Take away gears (14),(18),(21)

• Disassemble bearings brass (15),(22)
using chisel paying attention not to
damage the brass  surfaces.

• Disassemble outer rings (5), (12),(62)

«
...
18
19
20
21
22
...
»

Содержание H Series





















































Отзывы:

Нет отзывов