Kverneland H Series Скачать руководство пользователя страница 19 | Manualshive

Страница: 19 / 52

Kverneland H Series Скачать руководство пользователя страница 19

19

1. Greabox Disassembly

19

• Plugs (32),(39),(47) and empty the oil
• Level warning light (67)
• Washer (66)
• Bolts (10)
• Molded cover (56)

• Bolts (10)

• Molded plate (58).

• Cover (57), using chisel and hammer.

• Locknut (54),take away bolt washer (55)

• External lever (49) disassemble

• Take away o-ring (48)

• Lever (59 from cover (57).

• Disassemble snap ring (61) and fork (60)

• Disassemble oil seals (36),(43)
• Unscrew bolts(45), disassemble cover(46)
• Disassemble:
• Stud bolts (41),shim (44) outer ring (42)

•

Tools

:

Allen screw wrench n°9/16”,

Fork wrench n°1/2”-17-22-27-30,
Adjustable wrench, snap ring pliers.

• Disassemble the shaft (38), from side (A)

• Hit the crown wheel (26) from side (B)

• In order to extract inner bearing (42)

• Crown wheel (26) and shim (40)

• Disassemble:
Snap ring (24), inner ring (34)
snap ring (35), shims (37),outer ring (34)

• Uncaulk locknut (27).

• Unscrew locknut (27), disassemble

• Shim (28), crown wheel(64) and shim (25)

•

Tools

:

Chisel, hammer, fork wrench n°17

Allen screw wrench n°4, snap ring pliers
Extractor, adjustable wrench

«
...
17
18
19
20
21
...
»

Содержание H Series





















































Отзывы:

Нет отзывов