Kvaser T-Cannector Expansion L, Руководство пользователя

Страница: 7 / 18

Kvaser T-Cannector Expansion L User’s Guide 7 (18)
3 Kvaser T-cannector v2 (Base unit) hardware
Figure 2: Kvaser T-cannector v2 (Base unit) with D-SUB9 connectors.
Kvaser T-cannector v2 (Base unit) is a CAN bus hub with three D-SUB9 sockets
(see Figure 3) and one D-SUB9 plug connector (see Figure 4 on Page 8).
Figure 3:
Pinout of D-SUB9 socket.
All pins of these connectors are fully connected, e.g. pin 1 on each connector is
connected to pin 1 on all other connectors, see Figure 5 on Page 8.
Pin 9 (V+) and pin 3 (GND) are connected to the power supply. A power indicator
LED is connected as shown in Figure 5 on Page 8. The termination resistor is
selectable using the three-way switch marked SW.
Kvaser AB, Mölndal, Sweden — www.kvaser.com