Kvaser T-Cannector Expansion L User’s Guide
12 (18)
4.1
Assembly
In order to connect the Kvaser T-cannector L (Extension unit) with the Kvaser
T-cannector v2 (Base unit), position the Kvaser T-cannector L (Extension unit) so
the bottom D-SUB9 socket connects with the D-SUB9 plug connector on the
Kvaser T-cannector v2 (Base unit). See Figure 12.
Figure 12: Kvaser T-cannector L (Extension unit) connected on top of the Kvaser
T-cannector v2 (Base unit).
The final step is to connect the assembled Kvaser T-Cannector Expansion L to a
Kvaser T-cannector v2 (00776-5) as shown in Figure 13.
The difference between the Kvaser T-cannector v2 (Base unit) and the Kvaser
T-cannector v2 is that the former has the hex-nuts on the D-SUB9 plug exchanged
to screws in order to facilitate fastening of the assembly. This means that the
assembly needs to be performed as described.
Figure 13: Kvaser T-Cannector Expansion L connected to a Kvaser T-cannector v2
(00776-5).
Kvaser AB, Mölndal, Sweden — www.kvaser.com
