Kval RT-2 страница 2 Скачать руководство пользователя

Страница: 2 / 28

Kval RT-2 Operation and Service Manual

Proprietary Notice

This Manual is confidential and contains proprietary information and intellectual

property of KVAL Inc., and is to be used solely by Customer as an operating manual

for KVAL Inc. machines.

Neither this Manual nor any of the information contained

herein may be reproduced or

disclosed under any circumstances without the

express

written permission of KVAL Inc. For authorization to copy this information, please

call Kval Customer Support at (800) 553-5825 or fax (707) 762-0485. Outside the

U.S. and Canada, call (707) 762-7367.
Manual Part Number: DOC-114-1-OPSRV

RT-2

is a trademark of Kval Incorporated.

, TwinCAT 3, and EtherCat

are registered trademarks and are licensed by

Beckhoff Automation GmbH
Windows

is a registered trademark of Microsoft Corporation.

KvalCAM

is a registered trademark of Kvalinc.

All other products are trademarks or registered trademarks of their respective holders,

or sponsorship of Kval Incorporated.

Contacting KVAL

Customer Service:

For further information about this manual or other Kval Incorpo

rated products, contact the Customer Support Department

• Mailing address:

Customer Support Department
Kval Incorporated
825 Petaluma Boulevard South
Petaluma, CA 94952

• Phone and Fax:

In the U.S and Canada, call (800) 553-5825 or fax (707) 762-0485
Outside the U.S. and Canada, call (707) 762-7367 or fax (707) 762-0485

• Business hours:

Technical Support:

6:00 AM to 4:00 PM Pacific Standard Time, Monday through Thursday
6:30 AM to 1:30 PM Pacific Standard Time, Friday

Parts & Service Sales:

6:30 AM to 4:00 PM Pacific Standard Time, Monday through Thursday

6:30 AM to 1:30 PM Pacific Standard Time, Friday

(Other sales related inquiries: http://www.kvalinc.com)

• Email: [email protected]

Содержание RT-2





























Результаты поиска

Содержание RT-2

Отзывы:

Похожие инструкции для RT-2

Бренды по названию

Популярные бренды

Kval RT-2, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание RT-2

Отзывы:

Похожие инструкции для RT-2

Бренды по названию

Популярные бренды