Port-A-Cool, LLC • 709 Southview Circle • Center, TX 75935
www.kuulaire.com • 1-888-999-6511
5
To obtain a current list of Replacement Parts, visit us
online at www.port-a-coolparts.com.
REPLACEMENT PARTS
PARTES DE REPUESTO
WARNINGS AND SAFETY RULES
▲
!
LOCATION
PARTS DESCRIPTION
ELECTRICAL
ASSEMBLY INSTRUCTIONS
WARRANTY
CLEANING AND MAINTENANCE
TECHNICAL SPECIFICATIONS
TROUBLESHOOTING
REMOTE CONTROL
USE AND OPERATION
▲
!
Symptom
Possible Cause
Possible Solution
No discharge of air
Cord is not plugged in
Make sure cord is plugged in and try to turn the unit on pressing buttons
Power is not on
on control panel and remote control. Check the circuit breaker or check
Circuit breaker/GFCI
GFCI reset button.
Not cooling
Water flow regulator at low setting Change the water regulator setting to MAX. Check the water level
and turn on the pump by pressing COOL button.
Low/No water
Check Water
Odor emission
Brand new unit
Brand new media will initially have an odor which will dissipate within a
Old unit with algae
week of initial use. If the unit is not new, there may be an algae issue
– replace the pad and maintain regularly.
Water droplets coming
Calcium saturated water
Drain water, deep clean and clean the media.
out of air outlet
Clogged media
Media may need to be replaced.
The unit will not respond Damaged PCB
Try with remote control. If the unit responds, PCB board fasteners loose.
Moisture in PCB
If neither control panel nor remote control command works, PCB board
Remote control batteries
damaged - contact service technician.
Try using remote control to see if the unit responds. If the unit responds
briefly, likely cause is the moisture in the PCB. Turn off unit by unplugging
it from the power. Drain, clean and dry the unit, possibly replace the media.
Refill it with fresh water.
Check Batteries
Unit is making noise
Calcium build up in blower
Deep clean the unit -remove calcium debris. If the water level is near
Low or no water in the reservoir
empty pump will make loud noise.
The unit will not
Damaged PCB
Try to use remote control to see if the unit responds
turn off
Remote Control Batteries
Check batteries
