SECTION 7—OPERATION
7.3 MOVING MODE
–
OPPOSITE DIRECTION
1.
Place the Raptor RP-1 in the moving mode by pressing
the Mode switch, if needed, until the “PATROL” label
is displayed above the Patrol area and ‘P’ is displayed
in the road graphic. If necessary, select Opposite
Direction mode by pressing SAME/OPP switch on the
remote control (the opposite road graphic indicator will
be lit).
2.
Select the desired antenna, front or rear by pressing the
Front Hold or Rear Hold switch on the remote control.
3.
If the speedometer input feature is not used, check the
setting of the minimum patrol speed. To display the
existing patrol minimum setting, press the Menu (
)
switch to go to the main menu screen. To change the
patrol minimum setting, refer to Sec. (6.6).
4. While driving, observe traffic and complete a tracking
history on the target vehicle as described in Section 7.2
Step 3 and verify the radar’s patrol speed reading with
the patrol vehicle’s speedometer. When all elements
agree, enforcement action may be taken.
NOTE: If an incorrect Patrol speed is obtained, the
operator can go in and out of HOLD quickly.
This will clear all previous speeds, and a new
patrol speed search will be initiated. See Sec. 7.6
7.9
