SECTION 2--SPECIFICATIONS
2.7
Timing Error:
Displays “XTAL ERROR” in the
message area when an internal error in
the operating system is detected.
Active speed displays will blank.
Locked speeds will remain.
Transmitter Hold: Displays “HOLD” above the active
target speed area and in the message
area when the system is not
transmitting. (Controlled by the front
panel or remote control).
Lock:
“LOCK” displayed and flashing above
the FAST/LOCK speed area indicating
locked target speed.
Fastest:
“FAST” displayed above the
FAST/LOCK speed area when fastest
mode (stationary or moving) is
enabled.
Fork Test:
Displays “FORK TEST” in the
message area when the unit is in tuning
fork test mode.
Km/h:
Displays “Km/h” above the road
graphic area when the option for units
is set to km/h.
Road Graphic:
These indicators show the mode of
operation of the active antenna. In
HOLD the mode of operation of both
antennas are shown.
Target Direction: The indicators, above both target speed
areas, indicate the direction of travel of
the targets.
