Kusam-meco M3500, Руководство пользователя

Страница: 129 / 164

124 124 124 124
CALCulate:STATe?
Query the state of the math function. Returns “0”(OFF) or “1”(ON).
CALCulate:PERCent:TARGet { <value> |MINimum|MAXimum}
Set the target value for percent math function. The multimeter clears the value
when Min/Max is turned on, when the power has been off or a remote interface
reset.
CALCulate:PERCent:TARGet? [MINimum|MAXimum]
Query the target value for percent math function.
CALCulate:AVERage:MINimum?
Read the minimum value found during the Min/Max operation. The multimeter
clears the value when Min/Max is turned on, when the power has been off or a
remote interface reset.
CALCulate:AVERage:MAXimum?
Read the maximum value found during the Min/Max operation. The multimeter
clears the value when Min/Max is turned on, when the power has been off or a
remote interface reset.
CALCulate:AVERage:AVERage?
Read the average value of all readings taken since the Min/Max operation has
been enabled. The multimeter clears the value when Min/Max is turned on,
when the power has been off or a remote interface reset.
CALCulate:AVERage:COUNt?
Read the number of readings taken since Min/Max has been enabled. The
multimeter clears the value when Min/Max is turned on, when the power has
been off or a remote interface reset.
CALCulate:NULL:OFFSet {< value >|MINimum|MAXimum}
Store a null value in the multimeter’s Null Register. You must turn on the math
operation before writing to the math register . You can set the null value to any
number between 0 and
±
120% of the highest range.
CALCulate:NULL:OFFSet?
Query the null value.