®
®
01
Section One Safe Use
To ensure safe use, the meter and manual employ the following symbols:
Warning
: Identifies conditions and actions that may pose hazard (s) to the
user and avoid methods.
Caution
: Identifies conditions and actions that may damage the meter or the
equipment under test and avoid methods.
Note
: Reminds Users of knowledge of symbols for the operation and
explanations of the features.
To avoid possible electric shock or any other dangers, please do
follow the under-mentioned rules:
Warning
Do not operate the meter around explosive gas, vapor, or Dust,
which is extreme dangerous.
Never apply voltage exceeding 30V between any two Terminals and
earth ground terminals.
Caution
Do not open the meter's case except for the professional
Technicians.
Use a damp cloth with neutral detergent for cleaning the Meter
periodically. Do not use abrasives or solvents.
Note
To ensure accuracy, preheat for 5 minutes after power - on.
Please contact the manufacture or dealers if the Users have higher
accuracy requirement.
Section Two Components and functions of Meter's Panel
!
!
!
!
!
!
LCD
display
Range
selection
key
Function
key
Selection
key for 2-
wired, 3-
wired and
4-wired
output
selection
key
Input /
o u t p u t
terminal
Power-on
key
Input/Output
shift key
Output
clearing
key
O u t p u t
value set
key
Illustration for LCD display area
02
+
_
A)
OUTPUT :
indicates the meter is in output state.
B)
INPUT :
indicates the meter is in input state.
C)
CAL :
indicates the meter is in calibration state.
D)
0 FS
:
indicates the present calibrated zero point or full point
etc. when the meter is in calibration state
E) : indicates the batteries are exhausting and needs
replacement (See detailed section).
F) : indicates present set output value.
G)
Ω °C
:
indicates the unit for present output value.
H) O N :
indicates connection of output signals.
I)
Pt10
、
Pt100
、
pt200
、
pt500
、
Cu50
、
Cu10 :
