Kurzweil RE-220, Руководство пользователя, Страница: 35 / 52

34 MIDI Parameters
Sequencer Parameters
Metronome Volume
Change this setting to adjust the metronome volume. The range of setting is
from 0 to 8. The default value is 6 .
Transmit Sequencer Data
When Transmit Sequencer Data is ON , the data from the Recorder are
transmitted out the MIDI Out port. When it is OFF , the data are used to play the
internal sound only. The default is OFF .
The MIDI channels are used by the sequencer as follows:
Channel Description
1 Track 1 main sound
2 Track 2 main sound
5 Track 1 layered sound
6 Track 2 layered sound
9 Track 1 split sound
10 Track 2 split sound
display. If you press the Up button, Song Data Dump is executed.
The transmitted Data can be usually saved in software sequencers to support
System Exclusive Data Send/Receive. Conversely, the saved data in the
sequencer can be transmitted back and saved into the RE-220. This function will
be useful when you want to set aside current settings before executing Hard
Reset.
Panic
(All Sound Off, Reset All Controllers)
When this button is pressed and released, 'Y' '?' is shown on the display. If you
press the Up button, the Panic function is executed. The button sends All Sound
Off message and Reset All Controllers messages on all MIDI channels - both the
RE-220 sound engine and its MIDI Out port.