Kurzweil RE-220, Руководство пользователя, Страница: 12 / 52

11 Setting up the Instrument
Keyboard Assembly
1. Place the keyboard on the stand so that the wood pegs on the top of the side panel are fit
into the holes on the bottom of the keyboard.
2. Use two screws
⑧
and two screws
⑨
to fasten the bottom of the keyboard.
3. Insert the pedal cable connector into the pedal jack located on the bottome of the keyboard.
4. Rotate the pedal adjuster until it comes in firm contact with the floor surface. If the adjuster
is not in firm contact with the floor, the pedal will wobble and cause malfunctions.
5. Install the headphone hanger as shown in the figure below.
Screws ⑧ to fasten the
keyboard with side panel
Screws ⑨ to fasten the keyboard
with side panel & Leg
Be sure that the connector is inserted in the correct orientation.
Make sure that the cable clamp fastens to the pedal cable.
Pedal cable jack
Headphones jack
⑧ ⑨
Pedal adjuster