Kurzweil RE-220, Руководство пользователя, Страница: 30 / 52

29 Metronome
Metronome
Pressing the Metronome button allows you to hear the tempo of a song. It can be used as a
stand-alone metronome that is convenient for practicing. When the button is pressed, the light
goes on and the metronome starts; press it again to turn it off.
Adjusting Tempo
The tempo of the metronome or song record playback can be set from 20 to 300
beats per minutes by using the Up/Down button under the display. The default
tempo is 120.
Adjusting the time signature
The time signature (Beat) of metronome or songs can be selected from 2
to 6 beats. Press and Hold the Metronome button, which will to blink.
You can set the beat to 0, 2, 3, 4, 5 or 6 by pressing the Up/Down
buttons. When you set beats other than 0, the first beat is distinguished
by a triangle sound. '0' beat is internally set to 4 beat but plays the same
metronome sound for all beats. The default beat is 0.
After setting the beat, press the Metronome button again to exit the time
signature select mode.
Tap tempo
The Tap/Tempo button allows entering tempo data by repeatedly pressing the
Tap/Tempo button. The device will average your tapping speed and the
calculated tempo will be set in the metronome and songs. It's convenient to set a
tempo that you are thinking of without guessing the tempo.
1. Press the Metronome button to turn it on.
2. Press Up/Down button to adjust the desired tempo.
3. Press and hold the metronome button, then the display shows the current beat.
4. Select any beat you want by pressing the up/down button.
5. Exit by pressing the metronome button again.