Kurzweil CUP2A, Руководство пользователя

Страница: 16 / 26

page 10
The Settings Mode
includes parameters that allow you to change the overall behavior of the entire instrument.
The following parameters are available in
Settings Mode :
Transpose
Reverb Level
Touch Sensitivity
Tune
Treble
Bass
Top Speaker Level
MIDI Channel
Metronome Volume
Local Control
Auto Power Off
Audio Input
Hard Reset
OS/Object
Selecting and
Saving Settings
Press the Settings
button to enter
Settings Mode . Pressing the Settings
button repeatedly allows you to choose
one of the parameters listed above. Once you choose a parameter, you will use the
Prev- or Next+
buttons to navi
-
gate the values of that parameter. Pressing the Voice or Piano
button will exit this mode.
Transpose
The Transpose parameter allows you to adjust the overall pitch of the keyboard up or down in
semitone intervals.
Press the the Settings
button until the screen displays
Transpose: (0 is the factory default). To transpose the pitch
up, press the Next+
button for each semitone up in pitch. To lower or transpose down, Press the
Prev-
button to
lower the semitone pitch. Pressing the Prev- / Next+
button pair will reset the transposition back to factory default of
0. The transposition has a range of -24 to +24. This offers a two octave transposition range up or down.
Reverb Level
The reverb level parameter controls the level of the reverb effects used on a voice. Press the
Settings
button until
the screen reads REVERB LEVEL:20
(factory default). To increase the reverb effect, press the
Next+
button. To
decrease the reverb effect press the
Prev-
button. You can adjust the effect level from 0% (no effect) to 100%. Press
-
ing the Prev-
/
Next+
button pair will reset the effect level back to factory default of 20%.
Settings Mode