Kurz 410FTB, Руководство по эксплуатации

Страница: 92 / 165

Kurz B ‐ Series Operations Guide 4–19
Program Mode Advanced Setup
Option 8 — Setting Up Relays
The B ‐ Series has two solid state relays rated for +/ ‐ 30 VDC or 24 VAC up to 0.5 A RMS load. The
relay functions are configurable, but each relay can only be assigned one function at a time.
Note
The alarm relays are rated for 0.5A.
To access the Relay Outputs Setup menu in Program mode:
1>
Press P .
2>
Enter the Advanced access code, and then press E .
3>
Press 2 to invoke the Quick Jump option.
4>
Press 8 for the Relay Outputs Setup menu, and then press E .
SELECT RELAY #
>1
The menu prompts you for a relay number.
5>
Press either 1 or 2 , and then press E .
ASSIGN RELAY TO
>ALARM OUTPUT ^v
The meter prompts you for a function to assign to the selected relay number. Relay #1
can be assigned to the ALARM OUTPUT and TOT PULSE OUT functions. Relay #2 can be
assigned to the ALARM OUTPUT, TOT PULSE OUT, PURGE OUTPUT functions.
6>
Use the arrow keys to scroll through the list, and then press E .
If the relay is being used by another active function the following prompt appears:
RELAY IS USED
CHANGE IT>NO
7>
The relay can be reassigned to the new function by changing the
response to YES by using the arrow keys, and then pressing E .