Operation
GB
21
Operating the buttons
The controls described here expect the pressing of a (selection) button
to be
followed
by the pressing of a subsequent button.
The next button will need to be pressed
within 10 seconds
, otherwise the
selection will be deleted.
The plus/minus buttons can be touched individually or be permanently
pressed.
Switching on the hob and cooking zones
1. Press the
on/off button
until the power setting displays indicate 0. A
short signal will sound. The controls are ready for operation.
2. Immediately use the
plus button
or
the
minus button
to select a
cooking level. The plus button will activate power setting 1 and the minus
button power setting 12.
3. Immediately put
cookware suitable for induction cooking
onto the
cooking zone. The pan recognition device will activate the induction coil.
The pot or pan will be heated up.
As long as no cooking pot is placed onto the cooking zone, the display
will alternate between the power level set and the symbol .
If no pot is placed on the cooking zone it will switch off after 10 minutes
for reasons of safety. Please refer to the section on “Pan recognition”.
Switching off a cooking zone
4. a) Press the
minus button
several times until the power setting
display shows 0, or
b) Press the
minus button
and
the
plus button
once at the
same time. The cooking zone is switched off direct irrespective of the
power setting or
c) Press the
on/off button
. The entire hob will be switched off (all of
the cooking zones are switched off).
Switching off the hob
5. Press the
on/off button
. The hob will be completely switched off,
irrespective of any settings.
Power boost setting
The power boost setting makes additional power available for induction
cooking zones. A large quantity of water can be brought to the boil very
quickly.
The power boost setting operates for 10 minutes, after which the power level
is automatically reduced to cooking level 12.
1. Switch on the hob.
2. Press the
minus button
once in order to set the highest power
setting 12.
3. Press the
plus button
once in order to activate the power boost
setting. The power display will show a P.
4. After 10 minutes the power boost setting will switch off automatically. The
P will go off and the power level will switch down to 12.
Note:
In order to prematurely de-activate the power setting, press the minus button
.
Suitable for induction cooking
