20
GB
RECIRCULATION VERSION AIR OUTLET
• Insert reducer flange 9 on the extractor outlet.
• Push fit the extension piece 14 onto the flange.
• Push fit connector 15 onto the extension piece.
• Insert extension piece/connector 14.1 laterally on
connector 15, ensuring that the outlet is in line
with the chimney intake.
Flue assembly - Mounting the hood body
• Position the upper chimney stack and fix the top of it to
the frame using 2 of the screws removed as above.
• Insert the lower chimney stack into the frame, holding
it in place with adhesive tape in the area separating the
lower chimney stack from the upper one.
Recirculation version
• Make sure that the outlet of the extension piece 14.1 is
horizontally and vertically aligned with the chimney
outlet.
• If this is not the case, remove the lower Chimney Stack
and adjust the position of Extension 14; replace the
elements as described above.
Before fixing the Hood Canopy to the Frame:
• Remove the grease filters from the hood body;
• Remove any activated charcoal filters.
• From below, use the 4 screws 12f provided to fix the hood
body to the frame.
• Remove the adhesive tape fixed to the lower chimney
stack as above, and rest the lower chimney stack against
the hood canopy.
• For the Recirculation Version, fit the directional grill 8
into the housing provided. Also make sure that it is
properly fitted into connector 15.
12f
8b
15
14.1
14
9
