Küppersbusch GKS 644.0, Техническое руководство

Страница: 8 / 19

For internal use only
8 Service Manual GKS 324.0 + GKS 644.0
2.3 Installation Dimensions
GKS 644.0 GKS 324.0
*Appliance height
2.4 Installation
Make the worktop recess in accordance with the specified dimensions (see above drawing
”Installation dimensions”).
Always lift the hob at the sides and not at the front fasica!
Install sealing between cooking zone and worktop:
Prior to connecting the appliance to the power and gas supply install the sealing between coo-
king zone and worktop. To this end fasten the loosely attached, self-adhesive expanded rubber
gasket at the underside of the cooking zone frame starting at the rear middle. After the assembly
the gasket must fit as shown in the drawing below.
Prior to installation and after any disassembly the seal has to be checked for damage and cor-
rect seat and replaced, if required.
Additional sealing with silicon, etc. must not be provided as there is a risk that the coated work-
tops will be damaged when the hob is removed.
The built-in cubboard below the gas hob may be closed by means of an intermediate bottom as
air is supplied to the burner from the top through the knob opening.
1 Glass ceramics
2 Expanded rubber gasket
3 Hob