11
EN
Basic settings
Setting the clock
After your microwave oven is first plugged in or
after a power failure, the clock display will flash to
indicate that the time shown is not correct. To set
the clock, proceed as follows:
1. Press the Clock key (3) when the upper
display is showing the clock. The hour
numbers will start to flash.
2. Turn the Rotating Knob (7) to set the correct
hour value.
3. Press again the Clock key (3) to set the
minutes. The minute numbers will start to
flash.
4. Turn the Rotating Knob (7) to set the correct
minute value.
5. To finish, press the Clock
key (3) again.
Hiding/Displaying the Clock
If the clock display disturbs you, you can hide it by
pressing the Clock key for 3 seconds. The dots
that separate the hours and minutes will flash but
the rest of the clock display will be hidden.
If you want to see the clock display again, press
the Clock key again for 3 seconds.
Safety blocking
The oven operation can be blocked (for example,
to stop it from being used by children).
1. To block the oven, press the OK key (3) for 3
seconds. You will hear a sound signal and
the lower display will show the symbol “n--0”.
The oven is blocked in this state and cannot
be used.
2. To unblock the oven, press the OK key (3)
again for 3 seconds. You will hear a sound
signal.