22
Appliance description
GB
A
p
p
li
an
ce
d
es
cr
ip
ti
o
n
The decorative design may deviate from the illustrations.
1. Induction cooking zone front left
2. Induction cooking zone back left
3. Induction cooking zone back right
4. Induction cooking zone front right
5. Touch-control operating panel
6. Glass ceramic hob
7. STOP key
8. Power key
9. Power setting display
10. Select/Plus key
11. Minus key (lower)
12. Timer key
13. ON/OFF key
14. Display automatic switch-off device
15. Symbol for locating the position of a cooking zone on the
glass ceramic hob
16. Control lamp for locating the position of a cooking zone on
the glass ceramic hob
17. Cooking zone stand-by dot
Operating the hob with the sensor keys
The ceramic glass hob is operated with touch control sensor
keys. The sensor keys are operated as follows: lightly touch a
symbol on the surface of the ceramic glass plate. A buzzer will
indicate when the controls have been operated correctly. The
touch control sensor key will then be indicated as “key”.
ON/OFF key
(13)
This key is used to switch the entire hob on and off. It is, as it
were, the main switch.
Select/Plus key, e.g. front left
(10)
A cooking zone will be activated and the setting raised when a
Select/Plus key which is available is pressed.
Minus key
(11)
The setting can be reduced by pressing the Minus key.
Power setting display
(9)
The power setting display shows the power setting which has
been selected, or:
H................ Residual heat
A................ Automatic boost function
STOP ........ Stop function
ER03 ......... Error message
A cooking zone can be switched on when the stand-by dot
lights up.
Power key
(8)
The power boost setting makes additional power available for
induction cooking zones.
STOP key
(7)
The STOP function can be used to briefly stop the cooking
process.
Timer key
(12)
For increasing the cooking time when using the timer.
