Operation
GB
29
Keeping warm function
With the function for keeping food warm you can use one of the cooking
zones to keep food warm. The respective cooking zone is operated at a low
power level.
1. Cookware is placed on a cooking zone and a power level (e.g. 3) is
selected.
2.
Keep the Minus key
pressed
to switch the power settings down (...
3, 2, 1, ). The setting will stop at and the warming function will have
been activated.
3. Press the
Minus key
once to de-activate the function (0).
This keeping warm function is available for 120 minutes; the hob will then be
switched off.
Power boost setting
(cooking zones marked with a P)
The power boost setting makes additional power available for induction cook-
ing zones. A large quantity of water can be brought to the boil very quickly.
The power boost operates for 10 minutes and then the cooking zone will
automatically be switched down to power level 9 (only cooking zones with a
3 kW output, see “Technical data”).
1. A cooking zone must be switched on. The stand-by dot of the cooking
zone must light up. It may be necessary to press a
Select/Plus key
.
2. Press the
power button
once in order to activate the power boost
setting. The power display will show a P.
3. After 10 minutes the power boost setting will switch off automatically. The
P will go off and the cooking zone will switch down to power level 9 (only
cooking zones with a 3 kW output, see „Technical data”).
Note!
In order to terminate the power boost setting press the
Minus key
or the
power button
.
Power management
For technical reasons two cooking zones always comprise a module and
have a maximum power level.
If this power range is exceeded when a higher power setting level or the
power boost function is switched on the power management system will
reduce the power setting of the corresponding cooking zone of the module.
The display of this cooking zone will initially blink; the maximum possible
power setting will subsequently be shown constantly.
hold
Modules (power management)