• Replace the lens, making sure it fits in the
correct position without forcing it.
The replacement bulb must be temperature
resistant to 300 °C. These can be ordered
from the Technical Ser vice Depar tment.
11
10
Caution
For your own safety, never switch the oven on
without the back panel that protects the fan.
Clean the outside of the oven and the
accessories with warm soapy water or with a
mild detergent.
Caution
Never use metallic scouring pads or
commercial or scouring powders that could
scratch the enamel. For stainless steel
sur faces, proceed with care and only use
sponges or cloths that cannot scratch them.
To clean the outside of the oven do not attempt
to remove the controls, as for this, the oven has
to be first removed from the kitchen unit.
Dismantling / Assembly Instructions for the
interior glass
1
Open the oven door.
2
Pull the glass upwards from the bottom (A).
3
The interior glass is now free. Remove it.
Cleaning the Large Interior
Glass Door
Cleaning the Oven Exterior
and Accessories
A
Warning
Be careful: the oven door closes when the
interior glass is removed.
4
Clean the interior glass and the inside of
the oven door.
5
Inser t the suppor ts on the interior glass
into the grooves at the top of the door (B).
6
Lower the glass into the door (C).
7
The glass is fixed to the door by pressing the
two lower supports (D) while pushing the glass
into the door (E).
Caution
To change the bulb, first ensure that the oven
is disconnected from the power supply.
• Ease out the suppor ts (B), releasing them
from the bolt (C).
Changing the Oven Bulb
B
C
E
D
• Loosen the lens from the lampholder with
the help of the appropriate tool.
• Exchange the bulb.
B
C