Küppersbusch EDIP 6650.0, Руководство пользователя

Страница: 14 / 20

14 Service Manual
For internal use only
3. Remove the support.
4. Disconnect the transformer connections and
remove them; replace with a new transformer with
the same properties.
5. Re-assembling is carried out in reverse order.
6. Check the functions.
5.6 Replacing the touch controls
Should you determine that the control panel circuit board is not functioning, replace it as follows:
1. Press the two handles on the side to open up the
extraction panel for extraction around the edge.
2. Loosen the four fastening screws on the rails and
remove the glass telescopic section.