Küppersbusch EDIP 6650.0, Руководство пользователя, Страница: 13 / 20

Service Manual 13
For internal use only
5.4 Changing the halogen lamps
If the lighting does not work the lamps will firstly need to be checked and you will need to make sure that
the control switch on the control panel of the hood has not developed a fault.
Proceed as follows to replace a lamp or lamp mounting:
1. Use a small screwdriver to remove the groove nut
which holds the outer pane of glass and then
remove the glass pane.
2. Remove the defect lamp and replace it with a new
lamp with the same properties (simply press the
new lamp in).
3. Assembly is carried out in reverse order.
4. Check the functions.
5.5 Replacing the transformer
If the problem has not yet been rectified, you will need to replace the transformer as follows:
1. Move the pins around the edge in order to remove
the cover of the motor unit.
2. Remove the wing screw which fastens the
transformer supports to the casing.
Do not touch the new halogen lamps with your fingers; always use a piece of paper
or a soft cloth.