Kuppersbusch KI9820.0SF, Инструкция по использованию и установке

Страница: 36 / 72

36
Booster function
The Booster function [ P ] and the Double Booster [ ] adds a booster power to the selected heating zone.
If this function is activated the heating zones work for 10 minutes with an ultra high Booster.
Booster is useful for example to heat up rapidly big quantities of water, like rice, pasta or noodles.
•
Start up / Stop the booster function:
Action
Control panel Display
Zone selection Press key [ 0 ] from the zone [ 0 ]
Start up the Booster Press key [ B² ] [ P ]
Stop the Booster Slide on the “SLIDER“ [ 9 ] to [ 0 ]
•
Start up / Stop the double booster function:
Action
Control panel Display
Selection of the zone Press key [ 0 ] [ 0 ]
Start up Booster Press key [ B² ] [ P ]
Start up Double Booster Re-press key [ B² ] [ and P ]
Stop the Double Booster Press key [ B² ] [ P ]
Stop Booster Slide on the “SLIDER“ [ 9 ] to [ 0 ]
•
Power management:
The total cooking hob is equipped with an overall maximum of Booster power. When the Booster function is activated,
the electronic system automatically regulates all “Boosters” selected to equalise the available power to each element
selected for booster. The display is blinking on [ 9 ] for a few seconds and then shows the maximum of Booster
allowed :
Heating zone selected
The other heating zone: (example: Booster level 9)
[ P ] is displayed [ 9 ] goes to [ 6 ] or [ 8 ] depending on the type of zone
Timer
The timer is able to be used simultaneous with all heating zones and this with different time settings (from 0 to 99
minutes) for each heating zone.
•
Setting and modification of the cooking time :
Example for 16 minutes at power 7 :
Action Control panel Display
Zone selection press display [ 0 ] selected [ 0 ] and control light on
Select the power level slide on the “SLIDER“ to [ 7 ] [ 7 ]
Select « Timer » press 3s the timer/counter display [ 00 ]
Set the tens slide on the “SLIDER“ to [ 1 ] [ 1 blinking ] [ 0 fixed ]
Validate the tens press display [ 10 ] [ 1 fixed ] [ 0 blinking ]
Set the units slide on the “SLIDER“ to [ 6 ] [ 1 fixed ] [ 6 blinking ]
Validate the units wait 2 seconds [ 16 ]
The time is confirmed and the cooking starts.
•
To stop the cooking time:
Example for 13 minutes at power 7 :
Action
Control panel Display
Zone selection press display [ 7 ] selected [ 7 ] and control light on
Select « Timer » press 3s key [ 13 ] [ 13 ]
Set the tens slide on the “SLIDER“ to [ 0 ] [ 0 blinking ] [ 3 fixed ]
Validate the tens press display [ 10 ] [ 0 fixed ] [ 3 blinking ]
Set the units slide on the “SLIDER“ to [ 0 ] [ 0 fixed ] [ 0 blinking ]
Validate the units wait 2 seconds [ 00 ]