Operation
32
GB
4.10 Operating the keys
The controls described here expect the pressing of a (selection)
key to be followed by the pressing of a subsequent key. The next
key will need to be pressed within 10 seconds, otherwise the
selection will be deleted.
4.11 Switching on the hob and cooking zones
1. Press the ON/OFF key
(approx. 1 sec.) until the power set-
ting 0 appears and a short signal will sound. The controls are
ready for operation.
2. Use the Power setting display (as a key) to select a cooking
zone. The stand-by dot of the cooking zone selected will light
up.
3. The touch control
must be activated immediately
afterwards. A power setting will be switched on.
.......left Power setting 0.
.......center Power setting 6.
.......right Power setting P*
See the section on Worth knowing about the slider (sensor
fi eld)
Press the respective sensor fi eld
to change a power
setting or to switch on an additional cooking zone.
Important: the stand-by dot of the cooking zone selected must
light up.
4. Immediately put cookware suitable for induction cooking onto
the cooking zone. The pan recognition device will activate the
induction coil. The pot or pan will be heated up.
As long as no cooking pot is placed onto the cooking zone,
the display will alternate between the power level set and the
symbol . If no pot is placed on the cooking zone it will switch
off after 10 minutes for reasons of safety. Please refer to the
Section on pan recognition.
4.12 Switching off a cooking zone
Use the power setting display (as a key) to select a cooking zone.
The stand-by dot of the cooking zone selected must light up.
5. a) Press the sensor fi eld on the far left
or
b) drag your fi nger to the left across the touch control
to reduce the power setting to 0
c) press the ON/OFF key
. The entire hob will be switched
off (all the cooking zones are switched off ).
4.13 Switching off the hob
6. Press the ON/OFF key
. The hob will be switched off , irres-
pective of any settings.
Please note:
The hob will switch off automatically after 10 seconds when all the
cooking zones are switched of manually (power setting 0) and no
key/sensor fi eld is pressed afterwards.
* The Power boost function is activated immediately. See the secti-
on on Power setting.
Suitable for induction cooking
Stand-by dot
Содержание KI8820.0
Страница 45: ...Decommissioning and disposal of the appliance 45 GB...
Страница 46: ...Decommissioning and disposal of the appliance 46 GB...
Страница 47: ...Decommissioning and disposal of the appliance 47 GB...
Страница 48: ...K06 180185 01...