EN
45
RQWKHFRRNLQJ]RQHHQHUJ\VXSSO\
will resume at the same power level
previously selected.
,IDSDQLVWDNHQRႇWKH]RQHZKLOHLW
LVUXQQLQJWKHSODWHZLOODXWRPDWLFDOO\
stop supplying energy and it will
show the symbol for “there is no pan”.
When a pan is once again placed
RQWKHFRRNLQJ]RQHHQHUJ\VXSSO\
will resume at the same power level
previously selected.
:KHQ¿QLVKHGWXUQRႇWKH
cooking zone by using the touch
controls. Otherwise an undesired
operation could occur if a pan is
accidentally placed on the cooking
zone during the three minutes.
Avoid possible accidents!
%ORFN)XQFWLRQ
:LWKWKH%ORFN)XQFWLRQ\RXFDQEORFN
WKHRWKHUVHQVRUVH[FHSWIRUWKHRQ
Rႇ VHQVRU LQ RUGHU WR DYRLG
undesired operations. This function is
useful as a childproof safety.
7RDFWLYDWHWKLVIXQFWLRQWRXFKVHQVRU
(6) for at least one second. Once
\RXKDYHGRQHVRWKHSLORWWXUQV
on indicating that the control panel is
EORFNHG7RGHDFWLYDWHWKHIXQFWLRQ
simply touch sensor
(6) again.
If the on/off sensor
(1) is used
to turn off the appliance while the
EORFNIXQFWLRQLVDFWLYDWHGLWZRQ¶WEH
possible to turn the cooktop on again
until it unblocks.
Silencer of the beep
:KHQWKHKRELVRQLIRQHSUHVVHVWKH
touch key
(11) and the locking touch
key
(6) simultaneously for three
VHFRQGVWKHEHHSWKDWDFFRPSDQLHV
each action will be deactivated. The
time indicator (12) will display “OF”.
This deactivation will not be applied
WRDOOWKHIXQFWLRQVDVIRUH[DPSOHWKH
EHHSIRURQRႇWKHHQGLQJRIWKHWLPHU
or the locking/unlocking of the touch
keys always remain activated.
To once again activate all the beeps
WKDW DFFRPSDQ\ HDFK DFWLRQ DJDLQ
simultaneously press the touch key
(11) and the locking touch key
(6)
for three seconds. The time indicator
(12) will display “On”
Stop&Go Function
This function puts the cooking process
on pause. The timer will also be
paused if it is activated.
Activating the Stop function.
Touch the Stop sensor
(8) for one
second. The pilot (9) lights up and
the power indicators will show the
symbol
to indicate cooking has
been paused.
Deactivating the Stop function
Touch Stop&Go sensor
(8) again.
7KH SLORW WXUQV Rႇ DQG FRRNLQJ
resumes under the same power and
timer settings that were established
before the pause.
Power Function
This function supplies “extra” power
WRWKHSODWHDERYHWKHQRPLQDOYDOXH
Said power depends on the size of the
SODWHZLWKWKHSRVVLELOLW\RIUHDFKLQJ
the maximum value permitted by the
generator.
1
S l i d e t h e f i n g e r a b o v e t h e
corresponding cursor slider (2)
until the power indicator (3) shows
³´DQGNHHSWKH¿QJHUSUHVVHGIRU
RQHVHFRQGRUWRXFKGLUHFWO\RQ³3´
DQGNHHSSUHVVHGWKH¿QJHUIRURQH
second.
2
The power level indicator (3) will
show the symbol
DQGWKHSODWH
will start to supply extra power.
The Power function has a maximum
GXUDWLRQVSHFL¿HGLQ7DEOH$IWHUWKLV
WLPHWKHSRZHUOHYHOZLOODXWRPDWLFDOO\
adjust to 9. A beep sounds.
On activating the Power function in
RQH KRWSODWH LW LV SRVVLEOH WKDW WKH
performance of some of the others
PD\EHDႇHFWHGUHGXFLQJLWVSRZHUWR
DORZHUOHYHOLQZKLFKFDVHWKLVZLOOEH
displayed on its indicator (3).
'HDFWLYDWLRQ RI 3RZHU )XQFWLRQ
EHIRUHLWVZRUNLQJWLPHSDVVHVFDQ
be done either by means of touching
cursor “slider” modifying its power level
or repeating step 3.
Timer Function
(countdown clock)
This function facilitates cooking given
that you don’t have to be present: You
FDQVHWDWLPHUIRUDSODWHDQGLWZLOO
WXUQRႇRQFHWKHGHVLUHGWLPHLVXS
)RU WKHVH PRGHOV \RX FDQ
simultaneously program each plate
for durations ranging from 1 to 99
minutes.
Setting a timer on a plate.
Once the power level is set on the
GHVLUHG]RQHDQGZKLOHWKHGHFLPDO
GRWRIWKH]RQHNHHSVRQWKH]RQH
will be able to be timed.
To that end:
1
Touch sensor
(10) or
(11).
Timer Indicator (12) will show “00”
and corresponding zone indicator
(3) will show the symbol blinking
alternately with its current power
level.
2
Immediately afterwards set a
cooking time between 1 and 99
PLQXWHVXVLQJWKHVHQVRUV
(10)
ó
:LWK WKH ¿UVW RQH WKH
YDOXHZLOOVWDUWDWZKHUHDVZLWK
the second it will start at 01. By
keeping sensors
(10) ó
(11)
SUHVVHGWKHYDOXHZLOOEHUHVWRUHG
to 00. When there is less than one
PLQXWHOHIWWKHFORFNZLOOEHJLQWR
count down in seconds.
3
. When the timer indicator (12) stops
ÀDVKLQJLWZLOOVWDUWWRFRXQWGRZQ
the time automatically. The indicator
(3) relating to the timed hotplate
will alternately display the selected
power level and the symbol
Содержание KI6343.0SR
Страница 139: ......
