10
Service Manual
For internal use only
5.
Filters
5.1
Metal grease filters
The filters can be cleaned in the dishwasher; they should be cleaned when the drop symbol appears on
the display, or at least approx. every 2 months, or more frequently when the hood is used very
intensively.
5.1.1
Resetting the saturation display
Press key G for at least 2 seconds.
5.1.2
Cleaning the filters
1.
Open the Comfort Panel.
2.
Remove the filters one by one by pushing them to the back of the
group and at the same time pulling them down.
3.
Wash the filters, making sure not to bend them, and dry them
before putting them back in place (the filter surfaces may become
discoloured with time; this will not have any impact on the
effectiveness of a filter).
4.
When remounting the filters, make sure that the handle is on the
visible exterior.
5.
Close the Comfort Panel again.
IMPORTANT: For the 60-cm model, only remove the filters one after
the other by initially pushing them backwards while at the same
time pulling them downwards and then pulling them towards the
centre of the hob.
5.2
Charcoal odour filter (filter version)
The charcoal filter is not washable and nor is it recoverable; it needs to be replaced as soon as the
symbol C is shown in the display or at least after 4 months. The alarm report is preventively activated.
5.2.1
Activating the alarm signal
1.
For cooker hoods with filters, the alarm display for filter saturation is activated when the filter is
installed or as a result of installation.
