28
INSTALLATION
TECHNICAL INFORMATION
FOR FITTERS
Installation and all the regulation,
transformation and maintenance operations
listed in this section must be carried out
exclusively by qualified personnel.
Incorrect installation may cause injury to people
or animals, or damage to items, for which the
manufacturer cannot be held responsible.
Throughout the life of the system, the devices
for the safety and automatic regulation of the
appliances must only be modified by the
manufacturer or the duly authorised supplier.
3) INSERTING THE HOB
After removing the outer and inner packing of the
various mobile parts, ensure that the hob is
undamaged. If you are in any doubt, do not use the
appliance and connect qualified personnel.
The packing elements (cardboard, bags,
polystyrene, nails) must not be left within the
reach of children as they are potential sources
of danger.
Make a hole in the worktop to accommodate the
hob, using the measurements indicated in fig. 9,
ensuring that the critical dimensions of the space in
which the appliance must be installed are observed
(see fig. 10).
The appliance must belong to class 3 and is
therefore subject to all the indications of the
standards for such appliances.
The appliance can be installed with just one lateral
wall (to the right or left of the hob), higher than the
hob and positioned at a minimum distance as
described in the tale below.
FIG. 9
FIG. 10
A
B
C
D
E
1F - 2F (30)
285
485
57.5 57.5 73 min.
4F (60) 553 473
63.5 63.5 73 min.
MEASUREMENTS TO OBSERVE (in mm)
5F(90) 833 475
62.5 62.5
73
min.
