27
FIG. 7/B
CLEANING
The enamelled grids, enamelled covers “A”, “B” and
“C”, and burner heads “M” (see fig. 7 and 7/A) must
also be washed and the ignition elements “AC” and
safety cut-off sensors “TC” (see fig. 7/B) must be
cleaned. Do not wash them in the dishwasher.
Cleaning operations must be carried out when the
hob and components are not hot and the use of
metal scouring pads, powder abrasives and
corrosive sprays must be avoided.
Do not allow vinegar, coffee, milk, salt water, lemon
juice or tomato juice to remain in prolonged contact
with the surfaces.
WARNINGS:
when reassembling the components, observe
the following recommendations:
- check that the holes in the burner heads “M”
(fig. 7) are not blocked by foreign bodies.
- Ensure that the enamelled covers “A”, “B”
and “C” (fig. 7and 7/A) are correctly positioned
on the burner head. The covers are correctly
positioned on the head when they are
perfectly stable.
- If the opening and closing of any valve is
awkward, do not force it but request urgent
intervention by the technical assistance
service.
- Do not use jets of steam to clean the
appliance.
- To prevent difficulties with lighting, regularly
clean the ignition elements (ceramic and
electrode) and safety cut-off devices.
IMPORTANT:
when removing the burners to clean them, ensure
that all parts are correctly positioned before
relighting them. In particular for the “Dual”
burner,
never remove the central disc underneath the
lid (particular A - fig. 8), for cleaning
. Should this
operation be necessary, it must be carried out
exclusively by qualified personnel.
Do not remove the metal disc “B” screwed onto the
burner.
FIG. 8
FIG. 7
FIG. 7/A
FIGURE 1
