32
8) ELECTRICAL CONNECTION
The electrical connection must be made in
compliance with the standards and legal
provisions in force.
- Before making the connection, ensure that the
socket or system has an effective earth
connection in compliance with the standards and
legal provisions currently in force. We cannot
accept any responsibility for failure to observe
these provisions.
When the appliance is connected to the power
supply via socket:
- fit a standard plug suited to the load indicated on
the label to the power cable if necessary.
- Connect the wires, ensuring that the following are
observed:
letter L (phase) = brown wire;
letter N (neutral) = blue wire;
earth symbol
= green-yellow wire.
- The power cable must be positioned so that it
does not reach an over-temperature of 65K in any
point.
- Do not use reductions, adapters or shunts for the
connection, as they could make false contacts
causing hazards due to overheating.
- The socket must be accessible after fitting.
When the connection is made directly to the
electricity main:
- insert an omnipolar switch between the appliance
and the power network, in a size suited to the load
of the appliance, with a minimum aperture
between contacts of 3 mm.
- Remember that the earth cable must not be
interrupted by the switch.
- Alternatively, the electrical connection may also be
protected with a highly sensitive differential switch.
We strongly reccommend that you connect the
appropriate green-yellow earth wire to an efficient
earth system.
The manufacturer declines all responsibility for
damages suffered by people and items due to
failure to observe the aforementioned indications,
or deriving from interference with a single part of
the appliance.
WARNINGS:
all our appliances are designed and built in
compliance with the European standards
EN 60 335-1, EN 60 335-2-6 and EN 60 335-2-102
plus relative amendments.
The appliance is compliant with the indications
of the following European Directives:
- CEE 2004/108/CE related to electromagnetic
compatibility.
- CEE 2006/95 related to electrical safety.
INSTALLATION
