26
Operation
GB
Automatic boost function
Parboiling takes place at power level 12 with the automatic boost function.
After a certain time the power level will switch down automatically to a lower
simmering setting (1 to 11).
When using the automatic boost function only the simmering setting with
which the food is to be cooked through needs to be selected since the
electronic unit switches down automatically.
The automatic boost function is suitable for dishes which are cold initially and
are then heated up at high power. These dishes do not need to be constantly
monitored when simmering (e.g. boiling meat for soups).
1. Select power setting 0.
2. Then immediately press the
Plus key
and the
Minus key
simultaneously to activate the automatic boost function.
A and 12 (A and if no pot has been put on the hob) will then blink
alternately.
3. Then immediately use the
Minus key
to select a lower simmering
setting from 1 to 11.
4. The automatic boost function will operate as programmed. After a certain
time (see chart) the cooking process will be continued with the simmering
setting.
Instructions
• While the automatic boost function is in operation, the
Plus key
can
be
used to raise the simmering power setting. Pressing the
Minus key
will
switch the automatic boost function off.
• If, after activating the automatic boost function, the power level is left at
level 12 and no lower simmering setting is selected, the automatic boost
function will be switched off automatically after 10 seconds and the cooking
level will remain at 12.
Power boost
The power boost setting makes additional power available for the induction
cooking zone. A large quantity of water can be brought to the boil very
quickly.
The power boost setting operates for 10 minutes, after which the power level
is automatically reduced to cooking level 12.
1. Switch on the hob.
2. Press the
Minus key
once in order to set the highest power setting
(12).
3. Press the
Plus key
once in order to activate the power boost setting.
The power display will show a P.
4. After 10 minutes the power boost setting will switch off automatically. The
P will go off and the power level will switch down to 12.
Note:
In order to prematurely de-activate the power setting, press the
Minus key
.
Power setting
Automatic boost function
Time (min:sec)
1
2
3
4
5
6
7
8
9
10
11
12
0:40
0:48
1:04
1:36
2:00
2:56
4:00
5:20
7:12
2:00
3:12
-
