background image

Assembly instructions

GB

31

Electrical connection

• The electrical connection must be carried out by a qualified

electrician who is authorised to carry out such work!

• Statutory regulations and the connection specifications issued

by the local power supply company must be strictly observed.

• When connecting the appliance it must be ensured that there

is a device which makes it possible to disconnect it from the
mains at all poles with a contact opening width of at least 3
mm. Line-protecting switches, fuses or contactors are suitable
cut-out devices. When connecting and repairing the appliance
disconnect it from the electricity supply with one of these
devices.

• The earth wire must be sufficiently long so that if the strain

relief fails, the live wires of the connecting cable are subjected
to tension before the earth wire.

• Any superfluous cable must be removed from the installation

area beneath the appliance.

• Make sure that the local mains voltage is the same as the

voltage on the rating label.

• The induction hob has been fitted with a temperature-resistant

connection cable in the factory.

• The connection cable must be at least H05 RR-F.
• If the excess cable of this appliance is damaged, it has to be

replaced by the manufacturer, the Customer service of the
manufacturer or by another qualified person to avoid danger.

• Full protection against accidental contact must be ensured on

installation.

• Attention: Incorrect connection may result in the power

electronics unit being destroyed.

Power supply

Mains voltage: 220 - 240V~, 50-60 Hz
Component rated voltage: 230 - 240V

Electrical connections

Technical data

* Power when the power boost function is activated.

Start of operation

Once the hob has been installed and the power supply has been
provided (mains connected) an automatic test of the controls will
be carried out and information for customer service will be
indicated.
Briefly wipe over the surface of the hob with a sponge and soapy
water and then dry with a clean cloth.

Dimensions

Hob Height/ Width/ Depth

 mm 53/ 133 x 900 x 510

Cooking zones

Back left

 Ø cm / kW

Front left

 Ø cm / kW

Center

 Ø cm / kW

Back right

 Ø cm / kW

Front right

 Ø cm / kW

21/ 2,3 (3,2)*
14.5/ 1.4 (1.8)*
21/ 3.0
21/ 2.3 (3.2)*
14.5/ 1.4 (1.8)*

Hob, total

 kW 10.4

Содержание EKIW 957.0 F
















Отзывы: