24
Operation
GB
Child safety device / lock
The child safety device/ lock can be used to lock key operation and cooking
level settings. Only the on/off key can be used to switch the hob off.
Switching on the child-safety lock:
1. Press the
ON/OFF key
in order to switch on the childproof lock.
2. Then immediately press the
automatic switch-off key
and the
Minus
key
simultaneously to activate the function. The control lamp above
the stop key will light up. The controls are locked.
Switching off the childproof lock
3. Press the
ON/OFF key
.
4. Then immediately press the
automatic switch-off key
and the
Minus
key
simultaneously to de-activate the function. The control lamp
above the stop key will go off.
Activating the lock (while cooking):
• Press the
automatic switch-off key
and the
Minus key
simultaneously to activate the function. The control lamp above the stop
key will light up. The controls are locked.
Switching off the lock
• Press the
automatic switch-off key
and the
Minus key
simultaneously to de-activate the function. The control lamp above the stop
key will go off.
Instructions
• An activated child safety device/ lock will remain activated even if the hob
is switched off. It must therefore be de-activated when cooking is re-
commenced.
• In the event of a power cut the childproof lock will be cancelled, i.e.
deactivated.
Power boost setting (cooking zones marked
with a P)
The power boost setting makes additional power available for induction
cooking zones. A large quantity of water can be brought to the boil very
quickly.
The power boost setting operates for 10 minutes, after which the power level
is automatically reduced to cooking level 12.
1. Switch on the hob.
2. Press the
Minus key
once in order to set the highest power setting 12.
3. Press the
Plus key
once in order to activate the power boost setting.
The power display will show a P.
4. After 10 minutes the power boost setting will switch off automatically. The
P will go off and the power level will switch down to 12.
Note:
In order to prematurely de-activate the power setting, press the Minus key .
Power management
For technical reasons two cooking zones always comprise a module and
have a maximum power level. If this power range is exceeded when a higher
power setting level or the power boost function is switched on the power
management system will reduce the power setting of the corresponding
cooking zone of the module.
The display for this cooking zone will initially blink, after which the highest-
possible power setting will be consistently displayed.
Modules (power management)
