Appliance description
GB
21
A
p
p
li
an
ce
d
es
cr
ip
ti
o
n
1. Front left cooking zone
2. Back left cooking zone
3. Back right cooking zone
4. Front right cooking zone
5. Touch-control operating panel
6. Glass ceramic hob
7. ON key
8. OFF key
9. Control keys, front left cooking zone
10. Symbol for locating the position of a cooking zone on the
glass ceramic hob
11. Minus key (lower)
12. Plus key (raise)
13. Power setting display
14. Circuit activation key
15. Symbols for activation
16. Stop key
17. Lock key with control lamp
18. Timer control keys
19. Timer display (automatic switch-off)
20. Control lamp for locating the position of a cooking zone on
the glass ceramic hob
Operating the hob with the sensor keys
The ceramic glass hob is operated with touch control sensor
keys. The sensor keys are operated as follows: lightly touch a
symbol on the surface of the ceramic glass plate. A buzzer will
indicate when the controls have been operated correctly. The
touch control sensor key will then be indicated as “key”.
ON key
(7) / OFF key
(8)
This keys are used to switch the entire hob on and off (main
switch).
Minus key
(11) / Plus key
(12)
These keys are used to set the cooking levels, the automatic
switch-off device and the minute minder. The Minus key reduces
the setting and the Plus key raises it.
The setting can be deleted by pressing both keys simultaneously.
Power setting display
(13)
The power setting display shows the power setting which has
been selected, or:
H ............... Residual heat
A................ Automatic boost function
STOP ........ Stop function
L ............... Childproof lock
.............. Keep-warm function
Circuit activation key
(14)
To activate other heating circuits.
Activation is only possible when the control lamp blinks.
Symbols for activation (15)
Examples:
......... all three heating circuits are in operation
STOP key
(16)
The STOP function can be used to briefly stop the cooking proc-
ess.
Lock key
(17)
The lock key can be used to lock all of the keys.
Minus key
/ Plus key
of the timer (18)
For programming the automatic switch-off device (timer) and the
minute minder.
