background image

16

EKE 605.2F / 905.2F

Multi-circuit cooking zones

As a standard, the smallest cooking zone diameter is heated up. 
For large pots or frying pans, switch on the outer cooking zone circuit as well.

Dual-circuit cooking zones and frying zones

Press the cooking zone symbol next to the 
plus/minus sensor.
A dot at the bottom right of the display for 
the cooking level indicates that the func-
tion has been switched on.

Pressing the cooking zone symbol once 
again deactivates the dual circuit cooking 
zone or frying zone.

Triple-circuit cooking zones

Touch the triple-circuit cooking zone sym-
bol next to the plus/minus sensors. The 
middle cooking zone will be switched on 
as well and this will be indicated by means 
of a blinking light on the bottom right of 
the cooking level display.

Touch the cooking zone symbol once 
again. The outer cooking zone will be 
switched on as well and this will be indi-
cated by means of a light on the bottom 
right of the cooking level display.

Both of the outer cooking zones will be 
switched off simultaneously if the cooking 
zone symbol is touched again.

Using a frying pan (only EKE 905.2F)

To heat a frying pan you can use the two small, closely adjacent cooking zones. 
The temperature is controlled via the setting controls for both cooking zones.

Some instructions on cookware

Only use pans with even and flat bottoms.

Uneven pan bottoms prolong the boost times and increase the power require-
ment. Rough pan bottoms scratch the glass-ceramic area when shifted about. 
When using fireproof glass or porcelain cookware, please follow the manufac-
turers instructions.

Choose a pan with a diameter at least as large as the cooking zone.

You will thereby save energy and cooking time. You will also avoid overheating 
of the cooking area.

Wherever possible, place a lid on the pan.

You will save a lot of energy by cooking in a closed pan. Liquids and foods 
will only boil over if the temperature is too high. For the cooking zones, you 
can precisely set the temperature required. With a little practice, you will read-
ily make the correct choice of cooking settings so that nothing boils over even 
when a lid is in place. 

The rapid switch-off function

All the cooking zones can be 
switched off quickly with the OFF-
sensor.

Child proof lock (sensor-lock)

Operating the sensor-lock detains unauthorised persons from using the appli-
ance. In order to activate this lock the cooking area has to be in operation.

Activating child proof lock:

Press the sensor-lock (2 seconds). 
The child proof lock can be activat-
ed if the cooking area is in opera-
tion. In this case you can only 
choose a lower cooking setting or 
switch off.

The lock is indicated by 3 flashing control indicators.

Be careful:

 Switching off the cooking area does not deactivate the lock!

Deactivating the child proof lock:

Press the sensors under the two left flasing control indicators at once. 
After not more than 3 seconds press the sensor under the flashing control 
indicator on the right.

Note:

 When the power supply has been interrupted the child proof lock is no 

longer active.

at once,

after max. 3 Sek.

Содержание EKE 604.1











Отзывы: