Kuppersberg WM 1477, Технический паспорт

Страница: 6 / 56

6
TECHNICAL PASSPORT ENGLISH
Washing Machines
2. INSTALLATION

Remove the 2 or 4 transportation
screws (A) on the back and remove the
2 or 4 fl at washers, rubber bungs and
plastic spacer tubes (B) as illustrated in
fi gure 1.

If the washing machine is built-
in, unscrew the 3 or 4 transportation
screws (A) and remove the 3 or 4 fl at
washers, rubber bungs and plastic
spacer tubes (B).

During the removal of the screws
occasionally spacer tubes fall inside the
product, these can be remove by tilting
the product forward and recovering
them from the fl oor or inside the base
of the machine.

Cover the open transportation
screw holes with the 2 or 4 plastic caps
included in the instruction bag.
WARNING:
keep packaging materials away
from children.

Place the corrugated plastic
sheet, found on top of the appliance
during the unpacking process, into the
base of the appliance as shown in fi gure
2 (according to the model, consider
version A, B or C).
In some models this operation will not
be necessary, because the corrugated
plastic sheet will be already placed on
the bottom of the appliance.