Kuppersberg SA3VT02, Технический паспорт

Страница: 9 / 12

9
english Technical passporT
electric hob
7. BASIC SeTTINGS
1 Switching on
Â
Press «0/1» button and keep
pressed for 2 seconds, and a signal will
sound. All digits will show «0».
2 raising / lowering / resetting
cooking level
Â
Press «+» button to raise the
cooking level to maximum level 9.
Â
Press and «+» button
simultaneously to reset to level «0».
Â
When the appropriate button is
kept held down, the cooking level will
be raised/lowered automatically after
0,5 sec.
Â
A short signal noise will sound
for each change of the cooking level.
3 Select / cancel double zone
function
Â
Press double zone button, double
zone LED at the top of the Touch Control
radiant heater symbol will appear.
Â
Press double zone button again
double zone LED at the top of the Touch
Control will switch off.
4 Set power boost function
Â
Press «+» key in cooking level
«9» position, the decimal point of the
appropriate radiant heater digit will
light up.
Â
Power boost cannot be set in the
«0» position.
Â
If the cooking level is changed
during power boost function, the power
boost time is actuated for the new
cooking level.
Â
After the power boost time has
elapsed, the control switches over to
continuous cooking, a short signal
sounds and the decimal point of the
appropriate radiant heater digit will
disappear.
5 Cancelling boiling
(prematurely)
Â
Press key, the decimal point
of the corresponding radiant heater
disappears and the cooking level is
lowered.
6 Switching interlocking on
(blocking keyboard)
Â
Press the «interlocking» key for
2 seconds, the «interlocking» LED will
light up.
Â
The «interlocking» key can be
actuated in the switched on state with
the radiant heater activated or when
switched off.
Â
Warning: the stove cannot be
switched on in the interlocked state.
7 Switching interlocking off
(releasing keyboard)
Â
Press the «interlocking» key for
2 seconds, the «interlocking» LED will
disappear.
Â
The general OFF button is always
working. it is overwriting the interlock
state.
8 residual heat indication
Â
In the switched off state, the
residual heat is shown by a static «H» in
the appropriate digit.