Kuppersberg SA3VT02, Технический паспорт

Страница: 12 / 12

12
Technical passporT english
electric hob
9. TrOUBleSHOOTING – PrOBlem SOlVING
Before you contact the Technical Service, please perform the following checks.
The appliance does not work:
Ensure that the power cable is plugged in.
The pot sticks to the glass:
If there is molten material between the pot and the glass, set the hot plate to
maximum power and try to separate them.
message U400 and acoustic warning:
Power surge. Contact your electricity company.
Continuous beep, control disconnected and symbol on display:
There is an object or liquid on the touch control. Remove any object or liquid
on the touch control.
A hot plate disconnects and message e2 appears on the display:
If during cooking the temperature in the control electronics is excessive, the hot
plates near the control might disconnect to avoid damages. Excessive temperature
problems during cooking only occur in extreme cases (cooking at maximum power
for a long time). In any case, leave the hot plate to cool down for a few minutes.
If the problem persists, check that the appliance was installed in accordance with
these manual instructions.