Kuppersberg SA3VT02, Технический паспорт

Страница: 7 / 12

7
english Technical passporT
electric hob
When the connection has been done directly to the input system:
B
Interpose between the appliance and the system an onnipolar switch, adequate
to the load of the appliance, with a minimum nose betwen the contacts of 3 mm.
B
Keep in mind that the «earth» cable does not have to be interrupted by the switch.
B
In an alternative solution the electrical connection can also be protected by
a diferential switch with high sensitivity.
We recommend to fi x the earth coloured cable to an appropriate earth installation.
WArNINGS:
All our products are projected and built according with the European Norms EN
60 335-1 and EN 60 335-2-6 and relative amendments.
The appliance has been produced according with the European Directives:
– 2004 / 108 / EC concerning the compatibility electromagnetic.
– 2006 / 95 / EC concerning the electrical security.
5.3. STArTING TO APPlIANCe
Switching the system off
Â
Press «0/1» button and keep pressed for 2 seconds, a signal will sound and
the display disappears or shows a constant “H”.
Â
Switching off is always possible, regardless of the pre-selected setting.
Special points
Â
The functioning of the «0/1» button is always guaranteed if two buttons are
pressed.
Â
If all cooking levels are in position “0”, the controls will switch off automatically
after 5 seconds.
Â
If a button is pressed for more than 30 seconds, the controls will switch off
automatically and an alarm sounds every 30 seconds, for as long as a button is
pressed. The interlocking remains in force.