Kuppersberg HH 668 T, Технический паспорт

Страница: 36 / 84

36
TECHNICAL PASSPORT ENGLISH
Electric oven
Warm up the oven chamber
Â
Turn on the ventilation in the
room or open a window.
Â
Turn the function selector knob
and set the position or (there is a
detailed description of these functions
later in the instructions).
Rotate the temperature adjustment
knob and set the temperature to 250°C.
The oven should operate for a minimum
of 30 minutes; while it is operating
the oven produces a smell, which is
only present at the beginning but will
eventually go away as the appliance is
used. This is perfectly normal and is part
of the process of warming up the oven
chamber.
The oven is equipped with a
retractable knobs. In order to select a
function do the following:
1. Gently press and release a knob
which will pop out,
2. Turn the oven functions selection
knob to the desired function.
Symbols printed around the knob
indicate available oven functions.
Important!
In ovens equipped with the
electronic programmer Ts, the time
“0.00” will start flashing in the display
field upon connection to the power
supply. The programmer should be set
with the current time. (See Electronic
programmer ). If the current time is not
set operation of the oven is impossible.
The electronic prgrammer Ts is
equipped with electronic sensors which
are switched on by touching or pressing
the sensor surface for at least one
second.
Each sensor reaction is confirmed by
the beep.Keep the sensor surface clean
at all times.
Operate the control panel
МENU - select the mode of operation
> - higher setting sensor
< - lower setting sensor
- appliance on indicator
- Kitchen timer
- Duration
- End Time