Kuppersberg GLA 689, Технический паспорт

Страница: 38 / 84

38
Technical passporT english
Dishwasher
Â
Striking of the glasses to each
other or to other dishes due to the
impact of water during washing can
cause breaks, or scratches on their
surfaces.
A smear remains on glasses that
resembles milk stain which can
not be removed when wiped
by hand. A bluish / rainbow
appearance occurs when the
glass is pointed to light.
Â
Excessive rinse aid is used.
>>>Lower rinse aid setting. Clean the
spilled rinse aid when adding rinse aid.
Â
Corrosion has occurred on
glass due to soft water. >>> Measure
the hardness of the supply water
appropriately and check the water
hardness setting. If your supply water
is soft (<5 dH), do not use salt. Choose
programmes that wash in higher
temperatures (e.g. 60-65°C). You can
also use glass protective detergents
that are commercially available.
Foam forms in the machine.
Â
Dishes are washed with hand-
wash detergent by hand but not rinsed
before placing them into the machine.
>>> Hand-wash detergents do not
contain antifoam. There is no need to
hand-wash the dishes before placing
them into the machine. Removing the
coarse soil on the dishes under tap
water, with a tissue paper or fork will
be sufficient.
Â
Rinse aid has spilled into the
machine when adding rinse aid. >>>
Take care that rinse aid is not spilled
in the machine when you are filling it.
Clean any spilled rinse ait with the help
of a tissue paper/towel.
Â
Lid of the rinse aid reservoir is
left open. >>> Make sure that the lid of
the rinse aid reservoir is closed after
adding rinse aid.
Kitchen utensils are broken.
Â
Dishes are not placed orderly
in the machine. >>> Load the dishes as
described in the user manual.
Â
Baskets are overloaded. >>> Do
not overload the baskets in excess of
their capacity.
Water remains in the
dishwasher at the end of the
programme.
Â
Filters are clogged. >>> Check
if the filter system is clean. Clean the
filter system regularly as illustrated in
section «Cleaning and Care».
Â
Discharge hose is clogged/
blocked. >>> Check the discharge hose.
If necessary, remove the discharge hose,
clear the blockage and insert is as
illustrated in the user manual.
If you cannot eliminate the problem
although you follow the instructions in
this section, consult your dealer or the
Authorised Service Agent. Never try to
repair a nonfunctional product yourself.