Kuppersberg GLA 689, Технический паспорт

Страница: 15 / 84

15
english Technical passporT
Dishwasher
Depending on the model, salt
indicator and/or rinse aid indicator must
be enabled again if they were disabled
before.
Rinse aid
The rinse aid used in dishwashers is
a special combination used to increase
drying effi ciency and prevent water or
limescale stains on the washed items.
For this reason, care must be paid to
have rinse aid in the rinse aid reservoir
and to use rinse aids produced specially
for dishwashers only.
Check Rinse Aid Indicator to
determine whether it is necessary to
add rinse aid or not (depends on the
model). Having a dark light on the
indicator shows that there is suffi cient
amount of rinse aid in the dispenser. If
the colour of the indicator is light, add
rinse aid.
1. Open the lid of the rinse aid
reservoir by pressing its latch.
2. Fill the reservoir until “MAX” level.
3. Close the lid of the reservoir by
pressing on it lightly.
Wipe clean any spilled rinse aid
outside the reservoir. Rinse aid that
spilled accidentally will cause foaming
and it will eventually decrease washing
performance.
4. Turn the rinse aid amount
adjuster manually to a position
between 1 and 6. If there are
stains on tableware items after
washing, level must be increased
and if there is a blue trace after
wiping them by hand, it must be
decreased. This is set to position 4
as factory default.
Items not suitable for washing
in the dishwasher
Â
Never wash dishes soiled
by cigarette ash, candle remnants,
polish, dyestuff, chemicals, etc. in your
dishwasher.
Â
Do not wash iron alloy items in
the dishwasher. It can get corroded or
leave stains on other items.
Â
Do not wash silverware and
cutlery with wooden or bone stems,
glued pieces, or pieces that are not
resistant to heat, as well as copper and
tin-plated containers in the dishwasher.
Decorative prints of chinaware as
well as aluminum and silver items