Kuppersberg FA6VS02, Технический паспорт

Страница: 12 / 32

12
Technical passporT english
electric hob
When the connection to the input
system has been done through an outlet

Apply to t he input cable,
rf unprovided, a normalized plug
adequate to the load indicated in the
identifi cation label. Connect the cables
according to the scheme of Fig. 12.
Letter L (live)=cable brown colour;
Letter N (Neutral)=cable blue colour,
Symbol (earth) = cable green
-yellow colour.

The input cable has to
be located so that never reach the
temperature over 75 °C.

Please do not use in the
connection any reduction, adaptation
that may provoke a false contact with
following dangerous overheatings.

The outlet must be accessible
after the built-in.
When the connection has been
done the input system:

Interpose between the
appliance and the system an omnipolar
switch, adequate to the load of the
appliance, with a minimum gap of 3mm
between the contacts.

Keep in mind that the «earth»
cable does not have to be interrupted
by the switch.

In an alternative solution
the electrical connection can also
be
protected by a differential switch with
high sensitivity.
We recommend to fi x the earth
coloured cable to an appropriate earth
installation.
WArNiNGS:
All our products a re projected and
built in accordance with the european
Norms eN 60 335-1 and eN 60 335-2-6
and relative amendments.
The appliance has been produced
in accordance with the european
Directives:
- 2004/108/eC concerning the
electromagnetic compatibility.
- 2006/95/eC concerning the
electrical security.
TrANSFOrMATiONS
Before any kind of transformation, it
is necessary to cut off the electricity.
TrANSFOrMATiON
OF THe iNPUT TYPe
The standard equipment of
the appliances is for single phase
connection. In any case, under proper
changes, they can be fed with a three
phase system.
FIG. 12