Kuppersberg FA60RC, Технический паспорт, Страница: 33 / 60

33
ENGLISH TECHNICAL PASSPORT
Electric hobs
A pot or pan may become stuck to the
glass due to a product having melted
between them. Do not try to lift the pot
while the hot plate is cold! This could
break the glass.
Do not step on the glass or lean on
it as it could break and cause injury. Do
not use the glass as a surface for placing
objects. The Company reserves the
right to make changes to its manuals
without affecting the product’s essential
features.
Env ronmental Protect on
The symbol
on the product
or packaging means that this product
cannot be treated like usual household
waste. This product must be taken to a
recycling collection point for electrical
and electronic appliances. By ensuring
that this product is disposed of correctly,
you will avoid harming the environment
and public health, which could happen
if this product is not handled properly.
For more detailed information about
recycling this product, please contact
your local authority, household waste
service or the store where you purchased
the product.
The packaging materials used are
envirinmentally-friendly and can be
recycled completely. Plastic components
are marked >PE<, >LD<, >EPS<, etc.
Dispose of packaging materials, like
household waste, in your local container.
Troubleshooting – Problem
Solving
Before you contact the Technical
Service, please perform the following
checks.
The appliance does not work:
Ensure that the power cable is
plugged in.
The pot sticks to the glass:
If there is molten material between
the pot and the glass, set the hot plate
to maximum power and try to separate
them.
Message U400 and acoustic
warning:
Power surge. Contact your electricity
company.
Continuous beep, control
disconnected and symbol on
display:
There is an object or liquid on the
touch control. Remove any object or
liquid on the touch control.
A hot plate disconnects and message
E2 appears on the display:
If during cooking the temperature
in the control electronics is excessive,
the hot plates near the control might
disconnect to avoid damages. Excessive
temperature problems during cooking
only occur in extreme cases (cooking
at maximum power for a long time). In
any case, leave the hot plate to cool
down for a few minutes. If the problem
persists, check that the appliance was
installed in accordance with these
manual instructions.