kunzel BT 2030, Руководство по эксплуатации

Страница: 17 / 28

about another 15 mins. sufficient basic embers will have formed to cover the turbo-disk. Only then
should more small pieces of wood be added and finally the feeding chamber can be filled with logs
according to your requirements.
5. Adding fuel: If after burning out, there are still enough embers in the feeder chamber to relight
more wood, it is usually sufficient just to rake the embers and to clear the area around the turbo-
disk so that the flue gas can escape and to empty the ash tray. Make sure that the upcoming heat can
be fully absorbed by the buffer tank. Then relight the fire using the remaining embers and small
kindling wood and continue as described above.
Important: On every occasion the furnace chamber door is opened, open the warm-up damper com-
pletely, lock it in position, and close the ash hatch so that no smoke can escape.
17